Halo : Master Chief and Flood

Availability:

SOLD OUT

Edition Size:

600

Dimensions:

16.1" x 13.4" x 13" (H x W x D)
41 cm x 34 cm x 33 cm

Every bit as dangerous as the Covenant zealots, the seemingly mindless Flood infection threatens to over run the galaxy. While protecting Earth from its would be Covenant conquerors, the Master Chief must also fend off the relentless advance of these biological monstrosities - disturbing masses of meat and bone, distorted and sculpted into killing machines in service to the Gravemind.

Made to approximately 1/10th scale.

• Art Directed by Richard Taylor
• Lead Sculptor: Daniel Cockersell
• Sculptor: Jamie Beswarick
• 3D Sculptor: Stephen Lambert
• Model Maker: Neil Schrader
• Painter: Sourisak Chanpaseuth, Les Nairn

Instructions for assembly of Master Chief and Flood

Contents of box:

• 1 Black base
• 2 Steel rods (1 long, 1 shorter)
• 1 Flood (creature)
• 2 Gun blasts (1 long, 1 shorter)
• 1 Master Chief

Step by step instructions (please use the pictures on the side of the box as an example of the finished piece):

1. Screw the Steel rods tightly into the holes in the Black base. The long Steel rod should go into the hole for Master Chief's left hand.
2. Lightly grease the stell rods with vaseline, dishwashing liquid or a similar lubricant.
3. Gently slide the Flood onto the 2 Steel rods, through the 2 holes in the Flood. Gently slide the Flood right down to the bottom of the Steel rods.
4. Gently slide the Gun blasts onto the Steel rods. The long Gun blast should go onto the long Steel rod. Slide the Gun blasts down as far as they can go.
5. Lightly grease the protruding ends of the Steel rods.
6. Gently slide Master Chief onto the ends of the protruding Steel rods. 

To keep up to date with Weta's Halo 3 range:

sign up to our mailing list